8
SCANNING
8-4
1 Push [V/MHz] to enter the VFO mode
2 Push [FM/DV] to select the FM or DV mode
3 Hold down [SCAN] for 1 second
•
Opens the Scan Type Select window
4 Select a scan type
▼
•
The scan starts
•
The decimal point and the selected Scan Type icon
blink
L
When receiving a signal, the S-meter displays the
received signal strength
5 Hold down [SCAN] for 1 second
•
Cancels the scan
L
Holding down [CLR] also cancels the scan
VFO scan
D
Scan type
•
ALL:
Full scan
•
P-LINK0 ~ 9: Program Link scan
•
P00 ~ 24:
Program scan
•
DUP:
Duplex scan
(Displayed only when Duplex is set)
•
TONE:
Tone scan
(For the Tone Squelch scanning)
Information
L
•
The frequencies that are set as a Skip channel
(PSKIP) are skipped during a scan (p 8-8)
•
When
Program Skip
is set to “OFF,” the Skip
channel frequencies are not skipped (p 11-5)
(MENU > Scan >
Program Skip
)
•
To set a Program Link scan, see page 8-6
•
To set a Program scan, see page 8-5
TIP:
•
During a scan, rotate [DIAL] to change the
scanning direction
•
During a scan, push [FM/DV] to select the Receive
mode
•
During a scan, hold down [
] to turn the Lock
function ON or OFF
•
The scan continuously runs, even if you push
[MENU] or [QUICK] during a scan
•
You can select a scan type by rotating [DIAL] while
holding down [SCAN] Release [SCAN] to start the
scan