INTRODUCTION
v
Entering and editing text (Continued)
D
How to enter
Example:
Entering “Calling” as a Memory name.
1. Push [M/CALL] to enter a Memory mode.
2. Hold down [S.MW] for 1 second.
•
Enters the Select Memory Write mode.
•
The Memory channel number blinks.
3. Rotate [DIAL] to select a Memory channel.
4. Push [QUICK].
5. Select “Edit.”
•
The Edit screen is displayed.
6. Select “MNAME”.
▼
•
MEMORY NAME screen is displayed.
7. Push [QUICK].
8. Select the character type.
L
To enter symbols, select [!”#].
9. Rotate [DIAL] to select a character, then push
[ENT].
Information
L
•
To move the cursor forward, push [CS].
•
To move the cursor backward, push [CD].
•
To insert a text, move the cursor to a place to enter,
then rotate [DIAL].
•
To clear a character, push [CLR].
•
To consecutively clear characters, continuously hold
down [CLR].
•
When the character type is “AB” or “ab,” and while
entering a character, push [QUICK] to select upper
case or lower case letters.
10. Repeat steps 7 ~ 9 to enter a name.
11. After entering, push [ENT].
•
Returns to the Edit screen and the entered name is
displayed.
12. Select “<<Write>>.”
• Aconfirmationdialogisdisplayed.
13. Select <YES>.
▼
•
Returns to the Memory mode.
[ENT]
[Down]
[Up]
(Example: C)
(Example: Calling)