![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647130.webp)
8
SCANNING
8-11
Setting the skip channel
Temporary skip function
You can set or clear a Skip Channel setting
The channels that are set as a Skip channel are
skipped during a scan
1 Push [M/CALL] to enter the Memory mode
2 Rotate [DIAL] to select the Memory channel to be
skipped
3 Push [QUICK]
4 Select “SKIP”
5 Select an option
•
OFF:
Cancels the Skip Channel setting
•
SKIP:
Skipped during a Memory scan
•
PSKIP:
Skipped during both VFO and Memory
scans
▼
•
When a Skip channel is set, “SKIP” or “PSKIP” is
displayed
This function temporarily skips unwanted frequencies
during a scan for the set period of time, without
changing the Skip Channel setting
L
You can change
Temporary Skip Timer
on the
MENU screen (Default: 5 min)
(MENU > Scan >
Temporary Skip Timer
)
1 Start the VFO scan
•
When a signal is received, the scan pauses
2 Push [QUICK]
3 Select “Temporary Skip”
▼
•
After setting, the scan resumes
L
After the Temporary Skip Timer period ends, or the
scan is cancelled, the Temporary Skip function is
turned OFF
TIP:
To cancel the Skip Channel setting, select
“OFF” in Step 5
TIP:
•
During Memory or DR scanning, follow Steps 2 ~
3 to skip the Memory channel or repeater for the
set period of time (Default: 5 min)
•
Up to 5 Temporary Skip frequencies or Memory
channels can be set When the 6th frequency
or Memory channel is set, the oldest setting is
automatically deleted
[ENT]
[Down]
[Up]
[ENT]
[Down]
[Up]