![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647004.webp)
INTRODUCTION
iii
Entering and editing text
To change the character type
1. When not selecting text, or an entered text is
selected, push [QUICK].
2. Rotate [DIAL] to select the character type, then
push [ENT].
Character
type
Selectable characters
and symbols
Character
conversion
AB
A to Z, 0 to 9, (space)
A/a
ab
a to z, 0 to 9, (space)
A/a
12
0 to 9, (space)
–
!”#
! " # $ % & ’ ( ) * + , - . / : ; < =
> ? @ [ \ ] ^ _ ` { | } ˜ (space)
–
TIP:
When the character type is “AB” or “ab,” and
while entering a character, push [QUICK] to select
upper case or lower case letters.
▲▼
Controls used for text entry
Selects a character
Selects a character
Clears the entry
Cancels
Moves the cursor
to the right
Moves the cursor
to the left
Opens the Entry
Mode Select widow
Selects a character
[DIAL] (Rotate)
Sets
[ENT]
•
To insert a text, move the cursor to a place to enter,
then rotate [DIAL] or push [RX
→
CS]/[DR].
•
To clear a character, push [CLR].
•
To consecutively clear characters, continuously hold
down [CLR].
Push [QUICK]