11
MENU SCREEN
11-26
DV Set items
RX Bass
(Default: Normal)
MENU > DV Set > Tone Control >
RX Bass
Select the receive audio bass filter level.
•
Cut:
Reduces the low frequencies�
•
Normal: Normal tone balance�
•
Boost: Increases the low frequencies�
RX Treble
(Default: Normal)
MENU > DV Set > Tone Control >
RX Treble
Select the receive audio treble filter level.
•
Cut:
Reduces the high frequencies�
•
Normal: Normal tone balance�
•
Boost: Increases the high frequencies�
RX Bass Boost
(Default: OFF)
MENU > DV Set > Tone Control >
RX Bass Boost
Turn the Receive Audio Bass Boost function ON or
OFF�
L
This function is different from the “Boost” setting of
RX Bass
�
•
OFF: Turns OFF the function�
•
ON: This function boosts the receive audio bass�
TX Bass
(Default: Normal)
MENU > DV Set > Tone Control >
TX Bass
Select the transmit audio bass filter level.
•
Cut:
Reduces the low frequencies�
•
Normal: Normal tone balance�
•
Boost: Increases the low frequencies�
TX Treble
(Default: Normal)
MENU > DV Set > Tone Control >
TX Treble
Select the transmit audio treble filter level.
•
Cut:
Reduces the high frequencies
•
Normal: Normal tone balance
•
Boost: Increases the high frequencies
Auto Reply
(Default: OFF)
MENU > DV Set >
Auto Reply
Select an option for the Automatic Reply function in
the DV mode� This function automatically replies to a
call addressed to your own call sign, even if you are
away from the transceiver�
L
When “ON” or “Voice” is selected, the Automatic Reply
function is automatically turned OFF when you push
[PTT]� When “Position” is selected, the Automatic Reply
function is not turned OFF, even if you push [PTT]�
•
OFF:
Turns OFF the function�
•
ON:
Replies with your own call sign (No audio
reply is sent)�
•
Voice:
Replies with your call sign and any Auto
Reply message recorded on the SD (up to
10 seconds)�
L
The transmitted audio can be monitored�
L
If no microSD card is inserted, or no
message is recorded, only your call sign is
transmitted�
•
Position*: Replies with your own call sign and
transmits your position data using the
internal or external GPS receiver�
* When
GPS Select
is set to “OFF” or “Manual,” the internal
GPS receiver is temporarily turned ON�
When
GPS Select
is set to “External GPS,” but if the
external GPS receiver is not connected, the internal GPS
receiver is temporarily turned ON�
DV Data TX
(Default: Auto)
MENU > DV Set >
DV Data TX
Select whether or not to manually or automatically
transmit data in the DV mode�
•
PTT: Push [PTT] to manually transmit data�
•
Auto: When data is input from a PC through the
[DATA] jack, the transceiver automatically
transmits it�
NOTE:
The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version’s default settings, see page 11-3�