Icom ID-31A PLUS Advanced Manual Download Page 20

Page: 20 / 227

BATTERY CHARGING

3-3

Charging the battery pack

NOTE:

• Prior to using the transceiver for the fi rst time, the

battery pack must be fully charged for optimum

life and operation�

•

BE SURE

to turn OFF the transceiver while

charging with the supplied battery charger�

Otherwise the battery pack will not charge�

While charging, the charging icon

“

” sequentially displays 11 level steps of

“Charging��”

The icon disappears when the battery pack is

completely charged�

Charging information

• When using the optional CP-12L, CP-19R, or

OPC-254L, the battery pack can be charged with the

power ON�

To connect, see the illustration below.

While charging, the icon display changes, as shown

below�

“

”→“

”

•

The BP-273 battery case has no charging capability

or socket�

NOTE: BE SURE

to attach the battery pack before

connecting the DC cable

Approximate charging time

•

BP-271: 6 hours

• BP-272: 9 hours

The shape is different, depending on the version.

When using the BC-167S, turn OFF the transceiver.

BC-167S*

CP-12L

OPC-254L

← To an AC outlet

To a 12 V DC

power source

↓

↑

To a cigarette

lighter socket

(12 V DC)

↓

Black:

White:

Turn OFF*

To [DC IN]

Charging note

•

Turn OFF the transceiver when using the

BC-167S�

• To protect the battery pack, it cannot be fully

charged when not using the optional BC-202

desktop

charger

�

(p� 3-7)

•

DO NOT

charge the fully charged battery pack�

This may cause a shorter battery life�

CP-19R

Summary of Contents for ID-31A PLUS




































































































































































































































Search results

Summary of Contents for ID-31A PLUS

Reviews:

Icom ID-31A PLUS, Advanced Manual, Page: 20 / 227

Search results

Summary of Contents for ID-31A PLUS

Reviews: