![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647129.webp)
8
SCANNING
8-10
A Memory Bank scan scans the Memory channels in
the selected Bank
L
You must enter 2 or more Memory channels that are not
set as Skip channels to start a Memory Bank scan
(p 7-6)
L
When Bank Select is set to “OFF” in the QUICK MENU
window, a Memory Bank scan does not start
1 Push [M/CALL] to enter the Memory mode
2 Push [QUICK]
3 Select “Bank Select”
4 Select a Bank
5 Hold down [SCAN] for 1 second
•
Opens the Scan Type Select window
6 Select a Scan type
▼
•
The scan starts
•
The decimal point and
blink
L
When receiving a signal, the S-meter displays the
received signal strength
7 Hold down [SCAN] for 1 second
•
Cancels the scan
L
Pushing [CLR] also cancels the scan
Memory Bank scan
D
Scan type
•
ALL:
Full Bank scan
•
BANK-LINK: Bank Link scan
•
BANK-A ~ Z: Bank scan
( Displays only Banks that contain a
Memory channel)
•
DUP:
Duplex scan
( Displayed only when duplex is set on
the channel)
•
TONE:
Tone scan (For tone scanning)
Information
L
•
When all Memory channels in a Bank are set as
“SKIP” or “PSKIP,” the Bank is skipped during a
Bank Link scan (p 8-11)
•
When all Memory channels in the selected Bank are
set as “SKIP” or “PSKIP,” the Memory Bank scan
does not start
•
For the Bank Link scan setting, see page 11-5
D
About a Bank name
When a Bank name is assigned, the name is
displayed on the Scan Type Select window
L
The name is not displayed during a scan
L
To enter the name, see page 7-9
When the Bank name is assigned
When the Bank name is not assigned
[ENT]
[Down]
[Up]
TIP:
•
During a scan, rotating [DIAL] changes the
scanning direction
•
During a scan, holding down [
] to turn the Lock
function ON or OFF
•
The scan continuously runs, even if you push
[MENU] or [QUICK] during a scan
•
You can select a scan type by rotating [DIAL]
while holding down [SCAN] Release [SCAN] to
start the scan