![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647094.webp)
5
GPS OPERATION
5-27
GPS Alarm
D
Setting the GPS Alarm function to RX
(a caller station)
MENU > GPS >
GPS Alarm
1�
Push [MENU].
2�
Select “GPS.”
3�
Select “GPS Alarm.”
4�
Select “Alarm Select.”
5�
Select “RX.”
▼
• Returns to the GPS ALARM screen.
L
If you want to set the alarm to a specific GPS
Memory, select “Memory” and then select a GPS
Memory in a GPS Memory group.
L
To exit the MENU screen, push [MENU].
[ENT]
[Down]
[Up]
Information
L
• When a station with its GPS Alarm set enters within
an approximate 1 kilometer (1094 yard) range,
the alarm sounds once. When it enters within an
approximate 500 meter (547 yard) range, the alarm
sounds 3 times.
• When the transceiver sounds a GPS Alarm, “GPS
ALARM” pops up on the screen, and “
S
” blinks.
See the illustration below.
• To cancel the GPS Alarm function, select “OFF” in
step 5 to the left.
“GPS ALARM” pops up on the screen and
the alarm sounds, depending on the set range.
Blinks
TIP:
When selecting “RX” or a specific GPS
Memory in step 6 to the left, you also have to set
Alarm Area (RX/Memory)
to use the GPS Alarm
function. (p. 11-14)
( MENU > GPS > GPS Alarm >
Alarm Area (RX/
Memory)
)
NOTE:
Even if “RX” is selected in step 5, when
the received signal has no position data, the GPS
Alarm does not sound.