![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647037.webp)
4
D-STAR OPERATION
4-13
REPEATER DETAIL screen
Depending on the content, such as position data or
UTC offset, the distance between your position and
the repeater or the repeater time can be displayed on
the REPEATER DETAIL screen
The detail screen can also be entered from the FROM
SELECT screen
Example:
Displaying the “Hamacho” repeater detail
screen
1 Hold down [DR] for 1 second to display the DR
screen
2
Push [RX→CS] to select “TO,” then push [ENT].
3 Select “Gateway CQ”
4 Select “11: Japan”
5 Select “Hirano”
L
DO NOT push [ENT]
6 Push [QUICK]
7 Select “Detail”
L
If there is no position data, the distance and direction
from your position are not displayed See page 5-3 to
confirm your position.
L
When selecting the FM repeater, either of “FM” or
“FM-N” and the tone setting are displayed
8 Push [ENT]
•
Returns to the previous screen
TIP:
You can display the REPEATER DETAIL
screen when the DR screen is displayed
When you set the repeater as shown below, push
[QUICK], then select “Repeater Detail”
▼
•
Displays the REPEATER DETAIL screen
* When the “POSITION” setting (p 4-35) is set to
“Approximate” on the repeater list, the direction data is
not displayed if the distance to the repeater is less than 5
kilometers
The REPEATER DETAIL screen
Repeater time
Distance
from your
position
Repeater name
Sub name
Group number
Direction from
your position*
Call sign
Repeater
frequency
Duplex setting