![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647089.webp)
5
GPS OPERATION
5-22
GPS Memory
D
Add a GPS Memory (Continued)
7. Entering the GPS Memory altitude
1�
Select “ALTITUDE.”
2�
Rotate [DIAL] to select plus or
minus.
3�
Push [CD] or [CS] to move the
cursor to select a digit to enter.
4�
Rotate [DIAL] to enter the altitude.
L
Set to between –32808 and +32808 feet.
5�
Repeat steps 3 and 4 to enter the altitude.
6�
After entering, push [ENT].
8. Selecting a GPS Memory group
1�
Select “GROUP.”
2�
Select the group between
(No Group) and A ~ Z.
L
You can save up to 200 Memories in each group.
[ENT]
[Down]
[Up]
[ENT]
[Down]
[Up]
9. Writing the GPS Memory
1�
Select “<<Add Write>>.”
• The confirmation dialog is displayed.
L
If you edit a previously added GPS Memory, select
“<<Overwrite>>.”
2�
Select <YES>.
• The data is added to the GPS memory, and then the
selected GPS Memory group screen is displayed.
L
To exit the MENU screen, push [MENU].
TIP:
To view the entered content:
Select the GPS Memory channel. Rotate [DIAL] to
check the whole content.
To cancel the entered data:
While entering or editing the GPS Memory, push
[CLR] to display the confirmation dialog, as shown
below.
Select <YES> to cancel entering and the display
returns to the GPS Memory group screen.
[ENT]
[Down]
[Up]