![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647128.webp)
8
SCANNING
8-9
Memory scan
NOTE:
You must enter 2 or more Memory channels
that are not set as Skip channels to start a Memory
scan
1 Push [M/CALL] to enter the Memory mode
2 Hold down [SCAN] for 1 second
•
Opens the Scan Type Select window
3 Select a scan type
[ENT]
[Down]
[Up]
▼
•
The scan starts
•
The decimal point and
blink
L
When receiving a signal, the S-meter displays the
received signal strength
4 Hold down [SCAN] for 1 second
•
Cancels the scan
L
Pushing [CLR] also cancels the scan
D
Scan type
•
ALL: Full scan
•
MODE: Mode scan
•
DUP: Duplex scan
(Displayed only when duplex is set)
•
TONE: Tone scan
(For the Tone squelch scanning)
L
When 2 or more Memory channels that are not set
as Skip channels are entered, the Memory scan is
usable
L
The channel that is set as a Skip channel (PSKIP
or SKIP) are skipped during a scan (p 8-11)
TIP:
•
During a scan, rotate [DIAL] to change the
scanning direction
•
During a scan, hold down [
] to turn the Lock
function ON or OFF
•
The scan continuously runs, even if you push
[MENU] or [QUICK] during a scan
•
You can select a scan type by rotating [DIAL]
while holding down [SCAN] Release [SCAN] to
start the scan