![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647211.webp)
13
OPTIONS
13-5
VOX function
Step 2. Turning ON the VOX function
MENU > Function > VOX >
VOX
1� Push [MENU]�
2� Select “Function�”
3� Select “VOX�”
4� Select “VOX” (Turning the VOX function ON/OFF)�
5� Select “ON�”
L
To exit the MENU screen, push [MENU]�
L
When you connect the HS-94, HS-95, or HS-97
headset, “VOX” is displayed on the standby screen�
Step 3. Setting the VOX level
You can adjust the VOX level when the VOX function
is too sensitive or not sensitive enough with your voice
level�
MENU > Function > VOX >
VOX Level
1� Push [MENU]�
2� Select “Function�”
3� Select “VOX�”
4� Select “VOX Level�”
5� While speaking into the headset microphone,
rotate [DIAL] to adjust the VOX Level until “VOX”
is continuously displayed�
Information
L
•
You can set the VOX Level to between 1 (minimum)
and 10 (maximum), or turn OFF�
•
Higher values make the VOX function more sensitive
to your voice�
•
To exit the MENU screen, push [MENU]�
TIP:
•
If the status indicator blinks, set
VOX Delay
in the
MENU screen� (p� 11-39)
(MENU > Function > VOX >
VOX Delay
)
•
When the VOX function is ON, you can adjust the
VOX level by rotating [DIAL] while transmitting�
[ENT]
[Down]
[Up]
[ENT]
[Down]
[Up]