![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923032.webp)
3
PRIORITY WATCH
3-3
Step 1. Set the VFO frequency
(See Basic manual section 3)
1. Push [V/M] several times until you enter the VFO
mode.
2. Set the receive frequency and mode you want to
monitor.
Step 2. Set the Priority channel
To select a Memory channel
1. Push [V/M] to enter the Memory mode.
2. Rotate [DIAL] to select the Memory channel you
want to monitor.
1. Push [V/M] to enter the Memory mode.
2. Push [QUICK].
3. Rotate [DIAL] to select “Bank Select,” then push [
ï
].
4. Rotate [DIAL] to select the Bank channel you want
to monitor.
1. Hold down [CALL] for 1 second to enter the Call
channel mode.
2. Rotate [DIAL] to select the Call channel you want
to monitor.
Step 3. Starts the Priority watch
1. Push [QUICK].
2. Rotate [DIAL] to select “PRIO Watch,” then push
[
ï
].
3. Select the Priority watch option, then push [
ï
].
•“P” is displayed, and the Priority watch starts.
Example: Checks Memory channel “002” while
receiving on 146.010 MHz.
Checks Memory channel “002”
every 5 seconds.
Priority channel
Checks the selected Priority channel every 5 seconds,
while receiving on a VFO frequency.
VFO frequency and a Priority channel
Receiving
(5 seconds)
VFO
frequency
Priority
channel
Step 4. Canceling the Priority watch
1. Push [QUICK].
2. Rotate [DIAL] to select “PRIO Watch OFF,” then
push [
ï
].
•“P” disappears, and the Priority watch is canceled.
D
When a signal is received
When “ON” is selected.
When a signal is received on the Priority channel, the
channel is automatically selected.
•The “P” icon blinks.
L
The scan pause timer and resume settings are the same
as those for a normal scan. (p. 9-18)
Automatically selects
the Priority channel.
When “Bell” is selected.
When a signal is received on the Priority channel, the
display remains in the VFO mode.
•A beep sounds and the “
S
” icon blinks.
Remains in the VFO mode.
Previous view