![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923042.webp)
4
D-STAR OPERATION
4-5
D
Using the DR scan
The DR scan scans frequencies to find a signal on a
repeater or a simplex frequency.
You can use two kinds of DR scans, Normal scan and
Near Repeater scan.
Normal scan
To quickly find a repeater, the Normal scan skips
repeaters that are not specified as an access repeater.
(The “USE (FROM)” setting is set to “NO” (SKIP is
set) on the repeater list.)
Near Repeater scan
The Near Repeater scan searches for up to 20 nearby
repeaters by using your location and the repeater’s
entered location, and then lists the repeaters.
L
The Near Repeater scan will continue, even if you
turn OFF the power, and then turn it ON again
during the scan.
L
If your own position is not being received, the last
received position is used.
Example: Selecting the “HamFair” repeater in Japan
using the DR scan.
1. Hold down [DR] for 1 second to display the DR
screen.
2. Hold down [SCAN] for 1 second.
•Displays the DR scan setting window.
DR scan
setting window
3. Rotate [DIAL] to select the scan type.
• Normal:
Searches for repeaters whose “USE (FROM)”
setting is set to “YES.”
• Near Repeater (ALL):
Searches for up to 20 nearby DV or FM
repeaters. (Total 40 repeaters)
• Near Repeater (DV):
Searches for up to 20 nearby DV repeaters.
• Near Repeater (FM):
Searches for up to 20 nearby FM repeaters.
4. Push [
ï
].
•The selected scan starts.
While DR scanning
The repeaters
are sequentially
displayed.
L
While DR scanning, the repeaters are sequentially
displayed.
L
The scan resumes the same as other scans.
5. When the transceiver receives a signal from a
repeater, the scan stops.
6. Push [SCAN].
• The DR scan is canceled, and the repeater is set to
“FROM.”
NOTE:
Even if your transceiver receives a repeater
signal, the repeater may not receive your signal,
because the repeater’s output power is higher than
your transceiver’s, and your signal doesn't reach the
repeater.
TIP:
The DR scan scans the simplex frequencies in
the repeater list, in addition to a D-STAR repeaters.
“FROM” (Access repeater) setting (Continued)
Previous view