Icom D-STAR ID-4100A Advanced Manual Download Page 208

Page: 208 / 273

MENU SCREEN

9-65

Choose your language carefully

When the system language of the transceiver

is set to Japanese, the transceiver has the

capability to display both English and Japanese

characters. HOWEVER, if you select Japanese as

the display language, all menu items throughout

the transceiver system will be displayed in only

Japanese characters. There will be no English item

names. Unless you are fluent in reading Japanese

characters, use this feature with extreme caution.

If you change the transceiver’s language to

Japanese, and cannot understand the menu system

in the new setting, you will have to change the

language back to English in “Display Language” or

“System Language,” or by doing a partial reset of the

transceiver CPU. A partial reset will not clear your

call sign databases.

To do a partial reset of the CPU, do the following

steps:

1. Push [MENU].

2. Rotate [DIAL] to select the 8th page, then push

[

3. Select the bottom item, then push [

4. Select the upper item, then push [

Do not select the lower item. The lower item is

for the All reset function, and the All reset clears

all entries and returns all settings to their factory

defaults.

5. The dialog is displayed.

Select the left option, then push [

• When the partial reset is completed, “PARTIAL

RESET” is displayed, then the display automatically

returns to the default screen.

Display items (Continued)

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands