Icom D-STAR ID-4100A Advanced Manual Download Page 227

Page: 227 / 273

OTHER FUNCTIONS

10-11

Step 1. Setting the tone squelch frequency

DUP/TONE... >

TSQL Freq

1. Push [V/M] several times until you enter the VFO

mode.

2. Push [MODE] several times until you select the

FM or FM-N (FM narrow) mode.

3. Rotate [DIAL] to set an operating frequency.

4. Push [MENU].

5. Rotate [DIAL] to select “DUP/TONE...,” then push

[

6. Select “TSQL Freq,” then push [

7. Rotate [DIAL] to set a tone squelch frequency,

then push [

Set to between 67.0 and 254.1 Hz.

8. Push [MENU].

• Returns to the standby screen.

Step 2. Using the tone squelch

1. Push [QUICK].

2. Select “TONE,” then push [

3. Select the tone squelch type. (Example: TSQL)

4. Holding down [PTT] and call a station.

Operate normally.

The tone squelch opens only when you receive a

signal containing a matching subaudible tone in the

FM or FM narrow mode. You can silently wait for calls

from others using the same tone.

Also, the reversed tone squelch function will mute

the squelch when a signal containing a matched

subaudible tone.

Tone squelch frequency setting and operation

Tone squelch operation

To sound beeps when a call is received.

If “TSQL

” is selected, beeps sound for 30

seconds and “

” blinks when a call with the

matched tone signal is received.

Within 30 seconds, push [PTT] to stop the beeps.

(“

” disappears) After that, the transceiver selects

the regular tone squelch operation. If you make no

operation for 30 seconds, the beeps automatically

stop, but “

” continues to blink to indicate that you

received a call.

About the tone squelch type:

•TSQL

: Enables the Tone Squelch with the Pocket

Beep function.

•TSQL:

Enables the Tone Squelch function.

•TSQL-R: Enables the Reverse Tone Squelch function.

• TONE(T)/DTCS(R)

(“T-DTCS” is displayed, “T” blinks.):

When you transmit, the selected subaudible

tone is superimposed on your normal signal.

When you receive, the DTCS squelch opens

only for a signal that includes a matching

DTCS code and polarity. (Audio is heard)

• DTCS(T)/TSQL(R)

(“D-TSQL” is displayed, “D” blinks.):

When you transmit, the selected DTCS code

is superimposed on your normal signal.

When you receive, the tone squelch opens

only for a signal that includes a matching

tone frequency. (Audio is heard)

• TONE(T)/TSQL(R)

(“T-TSQL” is displayed, “T” blinks.):

When you transmit, the selected subaudible

tone is superimposed on your normal signal.

When you receive, the tone squelch opens

only for a signal that includes a matching

tone frequency. (Audio is heard)

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands