Icom D-STAR ID-4100A Advanced Manual Download Page 124

Page: 124 / 273

USING A microSD CARD

6-3

You can save the Memory channels, Menu screen

item settings, and repeater lists on a microSD card.

Saving data settings on a card enables you to easily

restore the transceiver to its previous settings, even if

you perform an All Reset.

You can save the setting data as a new file or to

overwrite an older file.

To save as a new file

SD Card >

Save Setting

1. Push [MENU].

2. Rotate [DIAL] to select “SD Card,” then push [

3. Select “Save Setting,” then push [

4. Select “<<New File>>,” then push [

•Displays the FILE NAME screen.

The file name is automatically named in the following

manner: Setyyyymmdd_xx (yyyy: Year, mm: month,

dd: day, xx: serial number)

Example: If a second file is saved on April 1, 2017,

the file is named “Set20170401_02.”

To change the file name, see “Save with a different

file name.” (p. 6-4)

5. Push [

•

The confirmation dialog “Save file?” is displayed.

6. Select <YES>, then push [

•Saves the data settings.

While saving, a progress bar is displayed, then

returns to the SD CARD screen after the saving is

completed.

7. Push [MENU].

• Returns to the standby screen.

Saving the setting data onto a microSD card

TIP:

The setting data are saved in the “icf” file

format that is used in the CS-4100

cloning

software

. When the saved data on a card is copied

to a PC, you can edit it with the cloning software.

To overwrite a file

To overwrite a file, select the file to be overwritten in

step 4 to the left.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands