Icom D-STAR ID-4100A Advanced Manual Download Page 167

Page: 167 / 273

MENU SCREEN

9-24

GPS Select

(Default: Internal GPS)

GPS > GPS Set >

GPS Select

Select either the internal or external GPS receiver that

the transceiver receives its position data from, or to

manually enter your current position data.

• OFF:

A GPS receiver is not used.

• Internal GPS: Position data of the internal GPS data

is used for the GPS functions.

• External GPS: Position data of an external GPS

receiver is used for the GPS

functions.

• Manual:

Manually enter the current Latitude,

Longitude and Altitude in Manual

Position.

Data communication is disabled when “External

GPS” is selected. (p. 4-27)

When “External GPS” is set, but if the external

GPS receiver is not connected, the internal GPS

receiver is temporarily turned ON if you use the

Automatic Position Reply function.

Manual Position (Default: LATITUDE : 0°00.00’N,

LONGITUDE : 0°00.00’E

ALTITUDE : ------ft)

GPS > GPS Set >

Manual Position

Manually enter the latitude, longitude and Altitude of

your current position.

You can capture the position from the GPS receiver

if “Capture From GPS” is selected. (p. 5-18)

GPS Out (To DATA jack)

(Default: OFF)

GPS > GPS Set >

GPS Out (To DATA Jack)

Select whether or not the position data of the internal

GPS receiver is output to the [DATA] jack.

TIP:

• When “GPS Select” is set to “OFF,” “External GPS,”

or “Manual,” GPS position data is not output from

the [DATA] jack.

• When you want to operate data communication in

the DV mode, set to “OFF.”

GPS TX Mode

(Default: OFF)

GPS >

GPS TX Mode

Select a GPS transmission mode to send a GPS

position data while in the DV mode.

•OFF: Does not transmit a GPS data.

•D-PRS: Transmits GPS data in the D-PRS format.

•NMEA: Transmits a GPS data in the NMEA format.

Unproto Address

(Default: API410,DSTAR*)

GPS > GPS TX Mode > D-PRS >

Unproto Address

Displays an unproto address of up to 56 alphanumeric

characters.

NOTE:

You should use the default address, and

editing is not recommended.

TX Format

(Default: Position)

GPS > GPS TX Mode > D-PRS >

TX Format

Select the format to transmit the position data in the

D-PRS mode.

•Position: The caller station is the mobile or base

station.

•Object: Transmits a certain location’s information,

such as an event, earthquake, and so on.

(time stamp data is included.)

•Item:

Transmits repeater or antenna information

that needs no time information.

(time stamp data is not included.)

•Weather: Transmits weather information received

from a weather device.

Symbol

(Default: Car)

GPS > GPS TX Mode > D-PRS > TX Format >

Position >

Symbol

Select the symbol that indicates your operating

situation. The selected symbol channel’s symbols

(1~4) are transmitted along with the position data.

Editing a symbol

1. Select the symbol channel, then push [QUICK].

2. Select “Edit Symbol,” then push [

3. Push [QUICK].

4. Select “Direct Input,” then push [

5. Push [MW] to move the cursor to the second digit,

or push [MODE] to move the cursor to the first digit.

6. Rotate [DIAL] to select a character or symbol to

the selected digit.

Selectable characters and symbols

<For the first digit>

/, \, 0 to 9, A to Z

<For the second digit>

A to Z, a to z, 0 to 9, ! " #

$ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜

7. After selecting, push [

•Sets the Symbol into the channel selected in step 1.

Selecting a preset symbol

1. Select the symbol channel, then push [QUICK].

2. Select “Edit Symbol,” then push [

3. Select the symbol, then push [

1:Car, 2: Van, 3: Truck, and 4:House QTH (VHF) are

set as defaults.

4. Select the symbol channel, then push [

GPS items

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands