Icom D-STAR ID-4100A Advanced Manual Download Page 140

Page: 140 / 273

REPEATER AND DUPLEX OPERATIONS

8-2

A repeater receives signals and on one frequency, and

then retransmits them on a different frequency. When

using a repeater, the transmit frequency is shifted

from the receive frequency by a frequency offset.

A repeater can be accessed using the Duplex function

by setting the transceiver’s offset to the same value as

the repeater’s offset.

See Section 4 for details on accessing a D-STAR

repeater.

1. Push [V/M] several times until you enter the VFO

mode.

2. Push [BAND].

•Enters the Band Select mode.

3. Rotate [DIAL] to select the operating band.

4. Push [BAND] again.

•Returns to the frequency display.

5. Push [MODE] several times until you select the

FM mode.

6. Rotate [DIAL] to set the receive frequency

(Repeater output frequency).

When the Auto Repeater function (usable in only the

USA version) is turned ON, skip steps 7 ~ 12. (p. 8-5)

7. Push [QUICK].

8. Rotate [DIAL] to select “DUP,” then push [

•Displays the Duplex direction setting window.

9. Select the offset direction, then push [

•Displays “D–” or “D+.”

You can set the frequency offset in the MENU screen.

(DUP/TONE... >

Offset Freq

) (p. 9-16)

10. Push [QUICK].

11. Select “TONE,” then push [

•Displays the Tone function setting window.

12. Select “TONE,” then push [

•Turns ON the repeater tone, and “TONE” is displayed.

You can set the tone frequency in the MENU screen.

(DUP/TONE... >

Repeater Tone

) (p. 9-16)

13. Operate in the normal way.

Subaudible tone is superimposed on your transmit signal.

Repeater

TX: 434.540 MHz
RX: 439.540 MHz

434.540 MHz

439.540 MHz

Station A

Station B

TIP:

• When the Repeater tone frequency or the

frequency offset is changed, the tone or offset for

Auto Repeater function is also changed.

• If the offset value will cause the transmit frequency

to be out of the band, “OFF BAND” is displayed on

the display when [PTT] is pushed, and transmit will

be inhibited. (p. 8-5)

FM Repeater operation

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands