![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923016.webp)
1
MEMORY OPERATION
1-9
D
Directly writing into a memory bank
You can also write the memory content directly into
a memory bank channel. This way is a short cut to
creating a memory channel, and then assigning it to
a bank. In that case, the transceiver automatically
selects the lowest blank memory channel, to write.
Example: Writing 146.030 MHz into Bank A.
1. Push [V/M] several times until you enter the VFO
mode.
2. Rotate [DIAL] to set 146.030 MHz.
3. Push [MW].
4. Rotate [DIAL] to select “Write to New CH,” then
push [
ï
].
• Displays the WRITE screen.
5. Push [QUICK].
6. Select a bank, then push [
ï
].
7. Push [MW].
•
The confirmation dialog “Write to a blank channel?” is
displayed.
8. Select <YES>, then push [
ï
].
• Beeps sound, and writes the memory content to the
bank channel.
TIP:
On the WRITE screen, you can select other
channel by rotating [DIAL].
L
If you select a pre-entered channel, the previous
channel content will be overwritten.
Memory bank setting (Continued)
D
Selecting the Memory Bank mode
When you select the Memory Bank mode, rotating
[DIAL] selects only the entered bank channels in the
selected bank.
1. Push [V/M] several times until you enter the
Memory mode.
2. Push [QUICK].
3. Rotate [DIAL] to select “Bank Select,” then push
[
ï
].
4. Select a bank, then push [
ï
].
5. Rotate [DIAL] to select a bank channel.
L
Only assigned bank channels are selectable.
L
To return to the Memory mode, select “OFF” in step
4.
TIP:
After step 5, you can write the displayed content
to the bank channel.
1. After step 5, push [V/M] to enter the VFO mode.
2. Set the frequency, then push [MW].
3. Rotate [DIAL] to select “Write to New CH,” then
push [
ï
].
[DIAL]
[ ]
[V/M]
[MW]
[QUICK]
Previous view