![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923146.webp)
9
MENU SCREEN
9-3
NOTE:
The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
DUP/TONE...
Settings to access repeaters.
Offset Freq
0.000~
0.600.00
*
1
~59.995 MHz
Sets the frequency offset for duplex (repeater)
operation.
Repeater Tone
67.0~
88.5
~254.1 Hz
Selects a tone frequency used to access the
repeaters.
TSQL Freq
67.0~
88.5
~254.1 Hz
Selects a tone frequency for the Tone Squelch
or the Pocket Beep function.
Tone Burst
OFF
or ON
Turns the Tone Burst function ON or OFF.
This function is used to suppress the RX
squelch tail noise in the FM mode, if you
transmit a signal which superimposes the
CTCSS tone or subaudible tone.
DTCS Code
023
~754
Selects a DTCS (both encoder/decoder)
code for DTCS Squelch or the Pocket Beep
function.
DTCS Polarity
Both N
, TN-RR, TR-RN, or
Both R
Selects the DTCS polarity for the DTCS
Squelch or the Pocket Beep function.
Digital Code
00
~99
Selects a digital code for the Digital Code
Squelch function.
Manage Memory
Manages your Memory or Call channel data.
Memory CH
ALL, A~Z
Manages the Memory channels.
Call CH
C0/C1(144):146.010 FM*
2
C0/C1(430):440.000 FM*
2
Manages the Call channels.
Scan
Set scan options.
Pause Timer
2sec~
10sec
~20sec, or HOLD
Selects the Scan Pause time. When receiving
signals, the scan pauses according to this set
period of time.
Resume Timer
0sec~
2sec
~5sec, or HOLD
Selects the Scan Resume time from a pause
after the received signal disappears.
Temporary Skip Timer
5min
, 10min, or 15min
Selects the Temporary Skip time. When the
time is set, specified frequencies are skipped
for this set period of time during a scan.
Program Skip
OFF or
ON
Turns the Program Skip Scan function ON or
OFF for a VFO mode scan.
Bank Link
A:
✔
~Z:
✔
Selects banks to be scanned during a Bank
Link Scan.
Program Scan Edge
00~24
Sets the frequency ranges for a Program
scan.
Program Link
See
for details of the preset values.
Sets the Link function for the Program Scan
Edge channels.
*
1
The default value may differ, depending on the frequency band and the transceiver version.
*
2
The default value may differ, depending on the transceiver version.
Menu items and Default settings
Previous view