![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923153.webp)
9
MENU SCREEN
9-10
Remote MIC Key
Selects the key function for [F-1] or [F-2] on
the supplied remote-control microphone.
During RX/Standby
[F-1]:MODE [F-2]:Monitor
Selects the key function to be used while
receiving or in the standby mode.
During TX
[F-1]:T-CALL [F-2]:---
Selects the key function to be used while
transmitting.
Up/Down MIC Key
Selects the key function for [UP] or [DN] on
the optional hand microphone.
During RX/Standby
[UP]:UP [DN]:DOWN
Selects the key function to be used while
receiving or in the standby mode.
During TX
[UP]:--- [DN]:---
Selects the key function to be used while
transmitting.
One-Touch PTT(Remote MIC)
OFF
or ON
Turns the One-Touch PTT function ON or
OFF.
PTT Lock
OFF
or ON
Turns the PTT Lock function ON or OFF.
Busy Lockout
OFF
or ON
Turns the Busy Lockout function ON or OFF.
Time-Out Timer
OFF
, 1min, 3min, 5min, 10min,
15min, or 30min
Selects the Time-Out Timer time options.
Active Band
Single or
All
Enables continuous frequency selection
across all bands by rotating [DIAL].
MIC Gain
1~
2
*~4
Sets the microphone sensitivity to suit your
preference.
Data Speed
4800bps or
9600bps
Selects the data transmission speed for
low-speed communication, or between the
[DATA] jack and external modules like a GPS
receiver, and so on.
CI-V
CI-V Address
02h~
9Ah
~DFh
Sets the transceiver's unique CI-V
hexadecimal address code.
CI-V Baud Rate
4800, 9600, 19200, or
Auto
Sets the CI-V code transfer speed.
CI-V Transceive
OFF
or ON
Turns the CI-V Transceive function ON or
OFF.
CI-V Bluetooth
➝
REMOTE
transceive Address
00
~DFh
Sets the address to inhibit the external control
with CI-V for the transceiver through the [SP]
(REMOTE) jack.
Power OFF (With No
Controller)
OFF or
ON
Selects whether or not to automatically turn
OFF the transceiver when the controller is
disconnected from the transceiver.
Display
Sets the Display options.
LCD Backlight Brightness
1~
4
Selects the LCD backlight brightness level.
LCD Backlight Color
White
, Amber, Green, or Blue
Selects the LCD backlight color.
Key Backlight Brightness
1~
4
Selects the key backlight brightness level.
Key Backlight Color
White
, Amber, Green, or Blue
Selects the key backlight color.
* The default value may differ, depending on the transceiver version.
Menu items and Default settings (Continued)
NOTE:
The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Previous view