![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923025.webp)
2
SCAN OPERATION
2-6
Memory scan
NOTE:
Two or more Memory channels, which are
not set as Skip channels, must be entered to start a
Memory scan.
1. Push [V/M] several times until you enter the
Memory mode.
2. Hold down [SCAN] for 1 second.
•Opens the Scan Type Select window.
L
If you hold down [SCAN] for 3 seconds, the last
selected scan starts.
3. Rotate [DIAL] to select a scan type, then push
[
ï
].
•The scan starts.
L
The decimal point and
blink.
L
When receiving a signal, the S-meter displays the
received signal strength.
4. Push [SCAN].
•Cancels the scan.
D
Scan type
The Memory mode scan has 5 scan types.
•ALL: Full scan
•BAND: Band Memory scan
•MODE: Mode Memory scan
•DUP: Duplex scan
(Displayed only when duplex is set.)
•TONE: Tone scan
(For the Tone squelch scanning)
L
When two or more Memory channels, which are not
set as Skip channels, are entered, the Memory scan is
usable.
L
The channels that are set as a Skip channel (PSKIP or
SKIP) are skipped during a scan. (p. 2-8)
TIP:
• During a scan, rotating [DIAL] changes the
scanning direction.
• The scan continuously runs, even if you push
[MENU] or [QUICK] during a scan.
[DIAL]
[ ]*
[V/M]
[SCAN]
*The key operation may differ,
depending on the operating status.
Previous view