Icom D-STAR ID-4100A Advanced Manual Download Page 232

Page: 232 / 273

OTHER FUNCTIONS

10-16

Transceiver-to-Transceiver cloning using a microSD card (Continued)

Cloning function

Step 3. Loading the setting data into the sub

transceiver.

SD Card >

Load Setting

1. Push [MENU].

2. Rotate [DIAL] to select “SD Card,” then push [

3. Select “Load Setting,” then push [

4. Select a file to load.

•Displays the LOAD SETTING screen.

5. Select the loading option, then push [

•ALL: Loads all memory channels, Menu screen

item settings and the repeater list into the

transceiver.

• Except My Station:

Loads all memory channels, Menu screen

item settings and the repeater list except

MY call signs and TX message into the

transceiver.

• Repeater List Only:

Loads only the repeater list into the

transceiver.

•

The confirmation dialog “Keep 'SKIP' settings in the

Repeater List?” is displayed.

6. Select <YES>, <NO> or <Cancel>, then push [

• YES: Retains the skip settings of the repeater

list. (p. 4-40)

• NO:

Does not retain the skip settings of the

repeater list.

• Cancel: Returns to the LOAD FILE screen.

•

When you select <YES> or <NO>, the confirmation

dialog “Load file?” is displayed.

7. Select <YES>, then push [

•

Starts the file check.

While checking the file, displays “CHECKING FILE”

and a progress bar.

8. After checking, settings data loading begins.

While loading, “LOADING” and a progress bar are

displayed.

9. After loading ends, “COMPLETED!” is displayed.

To complete the loading, restart the transceiver.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands