![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923207.webp)
9
MENU SCREEN
9-64
Opening Message
(Default: ON)
Display >
Opening Message
Select whether or not to display the opening message
at power ON.
• OFF: Opening message is not displayed.
• ON: Icom logo, MY call sign, the product model
(“ID-4100A” or “ID-4100E”)* are displayed.
*Depending on the version.
Voltage (Power ON)
(Default: ON)
Display >
Voltage (Power ON)
Select whether or not to display the power source
voltage at power ON.
• OFF: Does not display the voltage of the external
DC power source at power ON.
• ON: Displays the voltage of the external DC power
source at power ON.
NOTE:
When the voltage of the external DC power
source is over 17.0 V, “Over Voltage” is displayed.
In that case, immediately disconnect the DC power
source.
Latitude/Longitude
(Default: ddd ºmm.mm')
Display > Display Unit >
Latitude/Longitude
Select either the ddd ºmm.mm' or ddd ºmm'ss'' format
to display the position.
Altitude/Distance
(Default: feet/mile*)
Display > Display Unit >
Altitude/Distance
Select either the meter or feet/mile format to display
the distance and altitude.
Speed
(Default: mph*)
Display > Display Unit >
Speed
Select either the km/h, mph or knots format to display
the speed.
Temperature
(Default: ºF*)
Display > Display Unit >
Temperature
Select either the degrees ºC or ºF format to display
the temperature.
Barometric
(Default: inHg*)
Display > Display Unit >
Barometric
Select between the hPa, mb, mmHg and inHg format
to display the barometric pressure.
Rainfall
(Default: inch*)
Display > Display Unit >
Rainfall
Select either the mm or inch format to display the
amount of rainfall.
Wind Speed
(Default: mph*)
Display > Display Unit >
Wind Speed
Select between the m/s, mph and knots format to
display the wind speed.
Display Language
(Default: English)
Display >
Display Language
Set the screen display language type in the DR screen
or MENU screen to English or Japanese.
L
This item is displayed only when the “System
Language” is set to “Japanese.” See page 9-65
“Choose your language carefully” about setting
cautions.
System Language
(Default: English)
Display >
System Language
Set the system language of the transceiver.
• English: The system language of the transceiver is
English.
Only alphabetical characters (A to Z, a to
z, 0 to 9) and symbols (! " # $ % & ' ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~) can be
displayed. If Japanese characters (Kanji,
Hiragana and Katakana) are included,
the display shows “=” or “_” instead of
that character. In that case, you can only
delete “=” or “_” in the transceiver's edit
mode.
• Japanese: The system language of the transceiver is
Japanese.
Kanji, Hiragana and Katakana characters,
and the 2-bytes symbols can be
displayed. To display such characters
in the DR screen or Menu mode, set
“Display Language” to “Japanese.”
L
When this item is set to “English,” “Display
Language” is not displayed.
Display items (Continued)
* The default value may differ, depending on the transceiver
version.
Previous view