Icom D-STAR ID-4100A Advanced Manual Download Page 102

Page: 102 / 273

GPS OPERATION

5-19

Setting D-PRS Object/Item

8. Setting the Position (Continued)

Entering the altitude

14. Select “ALTITUDE,” then push [

•Displays the ALTITUDE screen.

15. Rotate [DIAL] to select between plus and minus.

16. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

17. Rotate [DIAL] to enter the altitude.

• Range: Set to between –32808 and +32808 feet.

18. Repeat steps 16 and 17 to enter the altitude.

19. After entering, push [

20. Select “<<Write>>,” then push [

•

The confirmation dialog “Write?” is displayed.

21. Select <YES>, then push [

•Writes the entered position data.

22. Push [



•Returns to the OBJECT or ITEM screen.

9. Setting the Data Extension

Set the data extension of an Object or Item’s

information.

1. Select “Data Extension,” then push [

2. Select the option to transmit, then push [

•OFF:

Does not transmit any

information.

•Course/Speed: Transmits the course and speed

data along with the position data.

•Power/Height/Gain/Directivity:

Transmits the TX power level,

height, antenna gain and antenna

direction, along with the position

data.

10. Setting the Course

This item is displayed when “9. Setting Data

Extension” is set to “Course/Speed.”

Set the Object or Item’s course when the station

moves.

1. Select “Course,” then push [

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the Object or Item’s course.

• Range: Set to between 0º and 360º.

4. Repeat steps 2 and 3 to enter the course.

5. After entering, push [

11. Setting the Speed

This item is displayed when “9. Setting Data

Extension” is set to “Course/Speed.”

Set the Object or Item’s speed.

1. Select “Speed,” then push [

2. Push [MW] to move the cursor forwards, or push

[MODE] to move the cursor backwards to select a

digit to enter.

3. Rotate [DIAL] to enter the Object or Item’s speed.

• Range: Set to between 0 and 1150 mph.

You can change the unit to “km/h” or “knots.”

(p. 9-64)

4. After entering, push [

12. Setting the TX power

This item is displayed when “9. Setting Data

Extension” is set to “Power/Height/Gain/Directivity.”

Select the TX power level of the Object or Item if the

station is a repeater, node, access point, and so on

and an antenna is installed.

1. Select “Power,” then push [

2. Select the option, then push [

•Options: Set to between 0, 1, 4, 9, 16, 25, 36,

49, 64, and 81W.

13. Setting the antenna height

This item is displayed when “9. Setting Data

Extension” is set to “Power/Height/Gain/Directivity.”

Select the height of the Object or Item’s antenna if the

station is a repeater, node, access point, and so on

and an antenna is installed.

1. Select “Height,” then push [

2. Select the option, then push [

•Options: Set to between 10, 20, 40, 80, 160,

320, 640, 1280, 2560, and 5120 feet.

You can change the unit to “meter.” (p. 9-64)

14. Setting the antenna gain

This item is displayed when “9. Setting Data

Extension” is set to “Power/Height/Gain/Directivity.”

Select the gain of the Object or Item antenna.

1. Select “Gain,” then push [

2. Select the option, then push [

•Options: Set to between 0 and 9 dB.

Transmitting D-PRS data

☞

Continued on the next page.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands