![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923100.webp)
5
GPS OPERATION
5-17
D
Setting D-PRS Position (Mobile/Base) (Continued)
12. Setting the antenna gain
L
This item is displayed when “9. Setting Data
Extension” is set to “Power/Height/Gain/Directivity.”
Select the gain of the base station’s antenna, to
transmit along with the position data.
1. Select “Gain,” then push [
ï
].
2. Select the option, then push [
ï
].
•Options: Set to between 0 and 9 dB.
13. Setting the antenna directivity
L
This item is displayed when “9. Setting Data
Extension” is set to “Power/Height/Gain/Directivity.”
Select the direction the base station’s antenna was
pointing, to transmit along with the position data.
1. Select “Directivity,” then push [
ï
].
2. Select the option, then push [
ï
].
•Options: Set to between Omni, 45ºNE, 90ºE,
135ºSE, 180ºS, 225ºSW, 270ºW,
315ºNW and 360ºN.
14. Exiting the MENU screen
Push [MENU].
• Returns to the standby screen, then displays “
.”
D
Setting D-PRS Object/Item
Set to transmit as a D-PRS Object or Item.
1. Setting the GPS TX Mode to D-PRS
GPS >
GPS TX Mode
1. Push [MENU].
2. Rotate [DIAL] to select “GPS,” then push [
ï
].
•Displays the GPS screen.
3. Select “GPS TX Mode,” then push [
ï
].
4. Select “D-PRS,” then push [
ï
].
TIP:
If the TX information setting has been done, you
can easily turn ON the GPS TX mode by pushing
[MENU] after step 4.
• Returns to the standby screen, then displays “
.”
2. Checking the Unproto Address
You should use the default address, and editing is not
recommended.
1. Select “Unproto Address,” then push [
ï
].
L
The default setting is “API410,DSTAR*.”
2. Push [
].
•Returns to the previous screen.
3. Setting the TX format to “Object” or “Item”
1. Select “TX Format,” then push [
ï
].
2. Select “Object” or “Item,” then push [
ï
].
•Displays the OBJECT or ITEM screen.
4. Entering Object name or Item name
Enter an Object or Item name, such as an event
information or location.
1. Select “Object Name” or “Item Name,” then push
[
ï
].
•Displays the “Object Name” or “Item Name” screen.
2. Enter an Object or Item name of up to 9
characters.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
L
See “Entering and editing text” for details. (p. iv)
3. After entering, push [
ï
].
Transmitting D-PRS data
☞
Continued on the next page.
Previous view