background image

 
 
 
 
 

 
 
 
 

INSTALLATION INSTRUCTIONS 

 

MODEL 

ML25 

Micro Link™ Peep-Hole Style 

Standard IR Receiver 

 

 

DESCRIPTION

 

The Micro Link IR Receiver is a small peep-hole style infrared repeater 
assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and 
a 3.5mm stereo mini plug, which is plugged directly into the “IR RCVR” 
jack on the connecting block, such as the models 789-44, CB60, and 791-
44. The Micro Link IR Receiver is primarily intended for use in installations 
where the connecting block is within reach of its 7-foot cable – as when 
installing the Micro Link IR Receiver in a cabinet where the controlled 
equipment is behind closed doors.   
 

FEATURES 

 

Small size; mounts in 1/2” diameter hole. 2 inches deep (50mm). 

 

Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in 
to Xantech Connecting Blocks.  

 

Works in normal 3-wire mode (12VDC, IR, GND). 

 

Green Talkback LED for System Verification. 

 

SPECIFICATIONS 

 

Infrared modulation frequency bandwidth: 25 – 60 kHz. 

 

IR reception range: Up to 80 feet, depending on remote control output 
strength and ambient conditions. 

 

Reception angle: 55 degrees off axis for 50% range reduction. 

 

Cable requirements: 3-conductor. Use 24 gauge up to 200’, 22 gauge 
up to 600’ 20 gauge up to 2000’, 18 gauge up to 5000’ – unshielded 
OK. 

 

Max. transmission length: 1 mile using 18 gauge wire.  

 

Maximum current output: 100mA 

 

Drives IR emitters through Xantech Connecting Blocks, Controllers, 
etc. 

 

Dimensions: 1/2” diameter x 2” deep (13mm x 50mm). 

 

Power requirements: +12VDC, 20mA. 

 
 

Reviews: