![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923026.webp)
2
SCAN OPERATION
2-7
A Memory Bank scan searches through the Memory
channels in the selected bank.
L
Two or more Memory channels, which are not set as skip
channels, must be entered to start a Memory Bank scan.
1. Push [V/M] several times until you enter the
Memory mode.
2. Push [QUICK].
3. Rotate [DIAL] to select “Bank Select,” then push
[
ï
].
4. Select a bank to be scanned, then push [
ï
].
5. Hold down [SCAN] for 1 second.
•Opens the Scan Type Select window.
L
If you hold down [SCAN] for 3 seconds, the last
selected scan starts.
6. Rotate [DIAL] to select a scan type, then push
[
ï
].
•The scan starts.
L
The decimal point and
blink.
L
When receiving a signal, the S-meter displays the
received signal strength.
7. Push [SCAN].
•Cancels the scan.
Memory Bank scan
D
Scan type
•ALL:
Full bank scan
•BANK-LINK: Bank link scan
•BANK-A ~ Z: Bank scan
( Displays only banks which contain a
Memory channel.)
•DUP:
Duplex scan
( Displayed only when duplex is set on
the channel.)
•TONE:
Tone scan (For tone scanning)
L
When all channels are set as “SKIP” or “PSKIP,” the bank
is skipped during a Bank Link scan. (p. 2-8)
L
When all channels in the selected bank are set as “SKIP”
or “PSKIP,” the scan does not start.
L
When two or more Memory channels, which are not set
as Skip channels, are entered in a bank, the Memory
TIP:
• During a scan, rotating [DIAL] changes the
scanning direction.
• The scan continuously runs, even if you push
[MENU] or [QUICK] during a scan.
• During a scan, you can change the bank to be
scanned on the Quick Menu window.
D
About a Bank name
When a Bank name is assigned, the name is
displayed on the Scan Type Select window.
L
The scan name is not displayed during a scan.
L
See
page 1-11 to enter the Bank name.
When the Bank name is assigned
Bank name
When the Bank name is not assigned
Bank initial
[DIAL]
[ ]*
[QUICK]
[V/M]
[SCAN]
*The key operation may differ,
depending on the operating status.
Previous view