Icom D-STAR ID-4100A Advanced Manual Download Page 194

Page: 194 / 273

MENU SCREEN

9-51

RX Call Sign SPEECH

(Default: ON (Kerchunk))

SPEECH >

RX Call Sign SPEECH

Turn the RX call sign speech function ON or OFF for

calls received in the DV mode.

• OFF:

The caller station’s call sign is not

announced, even when a call is

received.

• ON (Kerchunk): The caller station’s call sign is

announced only when they make a

short transmission.

• ON (All):

The caller station’s call sign is

always announced.

Information

• When the digital squelch function is used, the calling

station’s call sign is not announced if the received

signal is not addressed to your call sign, or does not

include a matched digital code.

• When you receive a signal from a repeater (“UR?”

or “RPT?”), the caller station’s call sign is not

announced.

• While scanning, the transceiver resumes the scan

during an announcement.

• Even if a note is entered after the call sign, it is not

announced.

• When you receive a signal during an announcement,

the transceiver cancels announcement, and you can

hear the received audio.

RX>CS SPEECH

(Default: ON)

SPEECH >

RX>CS SPEECH

Turn the RX>CS Speech function ON or OFF.

The RX>CS Speech function announces the station

call sign that is selected from a Received Call Record

by pushing [RX→CS].

• OFF: The station call sign is not announced.

• ON: The station call sign is announced.

If a call is received during an announcement, the

received audio is muted, and audio is not recorded

onto the microSD card.

If the call sign is announced while recording,

the recorded contents are silent during the

announcement.

DIAL SPEECH

(Default: OFF)

SPEECH >

DIAL SPEECH

Turn the Dial Speech function ON or OFF.

The Dial Speech function announces the frequency or

repeater call sign that is selected by rotating [DIAL].

• OFF: The frequency or repeater call sign is not

announced.

• ON: The frequency or repeater call sign is

announced, 1 second after rotating [DIAL].

In the VFO, Memory, or Call channel mode,

the frequency is announced.

When using the DR function, the repeater call

sign is announced.

When using the DR function, the frequency is

announced if Simplex is selected or the FM

repeater does not have a call sign.

When you receive a signal during an

announcement, the transceiver cancels

announcement, and you can hear the received

audio.

MODE SPEECH

(Default: ON)

SPEECH >

MODE SPEECH

Turn the Operating Mode Speech function ON or OFF.

When this function is ON, the selected operating

mode is announced.

• OFF: The selected operating mode is not

announced.

• ON: The selected operating mode is announced.

While the VFO scanning, the operating mode is

announced when you change the mode.

SPEECH Language

(Default: English)

SPEECH >

SPEECH Language

Set the speech language to English or Japanese.

Alphabet

(Default: Normal)

SPEECH >

Alphabet

Select either “Normal” or “Phonetic Code” to

announce the alphabet characters.

• Normal:

Normal code is used.

(Example: A as eh, B as bee)

• Phonetic Code: Phonetic code is used.

(Example: A as Alfa, B as Bravo)

SPEECH items

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands