Icom D-STAR ID-4100A Advanced Manual Download Page 52

Page: 52 / 273

D-STAR OPERATION

4-15

Connecting to a Reflector (Continued)

Unlinking a reflector

Before trying to link to another reflector, be sure to

unlink the current connected reflector.

1. Hold down [DR] for 1 second to display the DR

screen.

2. Select “TO,” then push [

•Displays the TO SELECT screen.

On the DR screen, pushing [DR] toggles between

“FROM” and “TO.”

3. Rotate [DIAL] to select “Reflector,” then push [

•Displays the REFLECTOR screen.

Select “Unlink Reflector,” then push [

•

Returns to the DR screen, and “Unlink Reflector” and

“U” are displayed in “TO.”

5. Hold down [PTT] to

unlink the reflector.

•Displays

while transmitting.

Reflector Echo Testing

You can transmit a short message, and after releasing

[PTT], your message will be played back. It is a

useful check of how well your signal is getting into

the repeater, and you can use it to verify that your

repeater is operating normally.

1. Hold down [DR] for 1 second to display the DR

screen.

2. Select “TO,” then push [

•Displays the TO SELECT screen.

On the DR screen, pushing [DR] toggles between

“FROM” and “TO.”

3. Rotate [DIAL] to select “Reflector,” then push [

•Displays the REFLECTOR screen.

4. Select “Echo Test,” then push [

• Returns to the DR screen, and “Echo Test” and “E” are

displayed in “TO.”

5. Hold down [PTT] and speak into the microphone.

•Displays

while transmitting.

6. Release [PTT] to hear your message.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands