Icom D-STAR ID-4100A Advanced Manual Download Page 56

Page: 56 / 273

D-STAR OPERATION

4-19

1. Push [QUICK].

2. Rotate [DIAL] to select “RX History,” then push

[

•Displays the RX HISTORY screen.

3. Rotate [DIAL] to select an RX history memory.

Information

• The RX history number, the caller’s name (or call

sign), destination, RX message, RX date and time,

“GW,” and “GPS” are displayed on the screen.

•“GW” is displayed when the Gateway call is received.

• “GPS” is displayed when the received call includes the

position data.

• “UP” is displayed when the repeater uplink signal is

received.

•

Hold down [RX→CS] for 1 second to temporary set

the received call sign to the “TO” field (destination).

4. Push [

•Displays the RX history detail screen.

☞

Continued on the next page

Viewing the received call signs

Called station

( “CQCQCQ” is

displayed if you

received a CQ call.)

The displayed icon differs, depending on the D-PRS TX

format.

GPS: Position OBJ: Object

ITEM: Item

WX: Weather

When a name is not entered in the memory, call sign

is displayed. You can change the display type between

“Name Display” and “Call Sign Display” in the Quick menu

window. (Default: Name Display)

Displayed when a

Gateway call is received.

RX HISTORY screen (RX01)

History

number

RX message

Received

date and time

Caller station*

A note may be

displayed after “/”.

First

page

D-PRS TX

format icon*

5. Rotate [DIAL].

•Selects the page.

<First page>

• CALLER: Displays the caller station’s name*

and any note entered after the call

sign.

• CALLED: Displays the called station’s name*

<Second page>

• RXRPT1: Displays the repeater’s name*

that

was accessed by the caller station. If

it was a call through a gateway and

the internet, this item displays the

gateway call sign of the repeater you

received the call from.

• Rx RPT2: Displays the repeater’s name*

you

received the call from.

“FREQUENCY” is displayed instead of above

items when the call was not through a repeater

(Simplex call), to show the frequency that was

used.

<Third page>

• RX MESSAGE: Displays any message included in

the received call, if entered.

• RX TIME:

Displays the date and time the

call was received.

When you receive a DV call, the calling station and

the repeater’s call signs are saved. Up to 50 calls can

be saved. Even if the transceiver is turned OFF, the

RX record is not deleted. When you receive the 51th

call, the oldest history will be deleted.

View the call signs in the RX History screen

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands