![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923115.webp)
5
GPS OPERATION
5-32
D
Setting the GPS alarm
A GPS alarm can sound when a target location comes
into the alarm area.
This function can be set to the caller station, all GPS
Memory channels, a specified Memory group or a
specified Memory channel.
0.25’
0.25’
0.25’
0.25’
N
Your
location
Your
location
Extended range
( Approximate 1 km,
1094 Y)
Limited range
( Approximate 500 m,
547 Y)
Beeps one times
Beeps three times
Beeps three times
When all channels or group is selected:
Alarm area 1 (Setting plural stations)
When a specified memory is selected:
Alarm area 2 (Setting specific station)
Point A
Point B
Point C
Example: Set the alarm to all GPS memory (All
Memories).
GPS >
GPS Alarm
1. Push [MENU].
2. Rotate [DIAL] to select “GPS,” then push [
ï
].
3. Select “GPS Alarm,” then push [
ï
].
•Displays the GPS ALARM screen.
4. Select
“Alarm Select,” then push [
ï
].
5. Select
“Group,” then push [
ï
].
6. Select “All Memories,” then push [
ï
].
•Returns to the GPS ALARM screen.
L
If you want to set the alarm to a GPS memory group,
select“(No Group)” or “A” to “Z.”
7. Push [MENU].
• Returns to the standby screen, then displays “
ì
.”
L
When either one of the stations in a specified group
enters the set range, the alarm sounds three times,
“GPS ALARM” pops up on the screen, and “
ì
”
blinks.
L
To cancel the GPS alarm, select “OFF” in the step 5.
TIP:
When “All Memories”, “A” to “Z” or “(No Group)”
is selected, the alarm sounds depending on the
“Alarm Area (Group)” setting on the MENU screen.
(GPS > GPS Alarm >
Alarm Area (Group)
)
Adding or editing GPS memory (Continued)
Alarm sounds, and “GPS ALARM”
pops up.
Blinks
When the GPS alarm sounds
Previous view