Icom D-STAR ID-4100A Advanced Manual Download Page 264

Page: 264 / 273

UPDATING THE FIRMWARE

13-2

About updating the firmware

You can update the ID-4100A/E’s firmware using a

microSD card. Updating the firmware can add new

functions or improve performance parameters.

You can download the latest firmware from the Icom

website.

http://www.icom.co.jp/world/index.html

Cautions

•

CAUTION: NEVER

turn OFF the transceiver

while updating the firmware. If you turn OFF the

transceiver, or if a power failure occurs while

updating, the transceiver firmware may be damaged

and you may have to send the transceiver back

to the nearest Icom distributor for repair. This type

of repair is out of warranty, even if the transceiver

warranty period is still valid.

• We recommend that you backup all the transceiver’s

data to a microSD card or to a PC before starting the

firmware update. Settings and/or memory contents

may be lost or returned to their default settings when

the firmware is updated.

• You are responsible for the the results after updating

the firmware.

Item requirement

•PC

•microSD card

•microSD card slot or a memory card reader

NOTE:

Before using a microSD card, format it with

the transceiver.

Formatting a card erases all its data. Before formatting

any used card, back up its data onto your PC.

See the Basic manual for details.

General

Checking the firmware version

You can check the firmware version on the MENU

screen.

Others > Information >

Version

1. Push [MENU].

2. Rotate [DIAL] to select “Others,” then push [

3. Select “Information,” then push [

4. Select “Version,” then push [

•

The firmware version is displayed.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands