Icom D-STAR ID-4100A Advanced Manual Download Page 2

Page: 2 / 273

INTRODUCTION

Thank you for choosing this Icom product. This product is designed and built with Icom’ s state of the art technology

and craftsmanship. With proper care, this product should provide you with years of trouble-free operation.

This product combines traditional analog technologies with the new digital technology, Digital Smart Technologies for

Amateur Radio (D-STAR), for a balanced package.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom,

Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.

Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other

countries.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is

under license. Other trademarks and trade names are those of their respective owners.

Android and the Android logo are trademarks of Google, Inc.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Apple, iPad, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

The iPhone trademark is used under license from AiPhone Co., Ltd.

Galaxy and Galaxy S are registered trademarks of Samsung Electronics Co., Ltd.

Google, the Google Logo, Google Play, the Google Play logo,

All other products or brands are registered trademarks or trademarks of their respective holders.

ABOUT THE CONSTRUCTION OF THE MANUAL

(As of April 2017)

Basic manual (Comes with the transceiver)

Instructions for the basic operations, precautions,

installation, and connections.

D-STAR Guide (Comes with the transceiver)

Instructions for registering your call sign on a gateway

repeater, and the basic operations of D-STAR.

About the DV Gateway function (PDF type)

Instructions on the system requirements or operations

needed to use the DV Gateway function.

The guide “About the DV Gateway function” can be

downloaded from the Icom website.

Advanced manual (This manual)

Instructions for advanced operations, as shown below.

•Memory operation <Advanced>*

•Scan operation <Advanced>*

•Priority watch operation

•D-STAR operation <Advanced>*

•GPS operation

•Using a microSD card

•Voice memory operation

•Repeater and duplex operations

•Menu screen <Advanced>*

•Other functions

•Options <Advanced>*

•Bluetooth operation

This manual can be downloaded from the Icom

website.

*The basic instructions are described on the Basic manual.

You can use the following manuals to understand and operate this transceiver.

If necessary, you can download a glossary of HAM radio terms from the Icom website.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands