Icom D-STAR ID-4100A Advanced Manual Download Page 142

Page: 142 / 273

REPEATER AND DUPLEX OPERATIONS

8-4

The Duplex operation shifts the transmit frequency

up or down from the receive frequency by an offset

amount.

Setting the frequency offset

NOTE:

The frequency offset cannot be changed

when using the DR function.

DUP/TONE... >

Offset Freq

1. Push [MENU].

2. Rotate [DIAL] to select “DUP/TONE...,” then push

[

3. Select “Offset Freq,” then push [

4. Rotate [DIAL] to set the offset.

(Example: 0.700.00 MHz)

Set to between 0.000.00 and 59.99500 MHz.

The selected tuning step in the VFO mode is used to

set the offset.

5. Push [

] to set the offset.

6. Push [MENU].

• Returns to the standby screen.

Setting the duplex direction

1. Push [QUICK].

2. Rotate [DIAL] to select “DUP,” then push [

3. Select the offset direction, then push [

•OFF: For simplex operation (the receive and

transmit frequencies are the same).

•DUP–: The transmit frequency shifts down

from the receive frequency by the offset

amount.

•DUP+: The transmit frequency shifts up from the

receive frequency by the offset amount.

•Displays “D–” or “D+.”

Duplex operation

TIP:

If the offset value will cause the transmit

frequency to be out of the band, “OFF BAND” is

displayed on the display when [PTT] is pushed, and

transmit will be inhibited. (p. 8-5)

Duplex operation

1. Push [MONI] to listen to the transmit frequency to

check whether another station is transmitting on

it, or not.

• The transceiver transmit frequency is displayed on the

display.

2. Push [MONI] again to cancel monitoring.

3. Operate in the normal way.

NOTE:

When the Auto repeater is ON, and the

operating frequency is set out of the repeater output

frequency range, the duplex mode is automatically

cancelled.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands