Icom D-STAR ID-4100A Advanced Manual Download Page 143

Page: 143 / 273

REPEATER AND DUPLEX OPERATIONS

8-5

If the transmit frequency is out of the amateur band,

the off band indication, “OFF BAND,” is displayed

on the display when [PTT] is pushed. Check the

frequency offset or duplex direction in this case.

(p. 8-2)

Off band indication

Displayed

When the operating frequency falls within the repeater

output frequency range, the Auto Repeater function

automatically sets the repeater settings (duplex ON/

OFF, duplex direction, tone encoder ON/OFF).

The Auto Repeater function uses the preset repeater

tone frequency and frequency offset.

Function >

Auto Repeater

1. Push [MENU].

2. Rotate [DIAL] to select “Function,” then push [

3. Select “Auto Repeater,” then push [

4. Select the option to turn ON the Auto Repeater

function.

•OFF:

Turn OFF the function.

•ON (DUP):

Turns ON only the duplex

operation. (Default)

•ON (DUP, TONE): Turns ON the duplex

operation and tone encoder.

5. Push [MENU].

• Returns to the standby screen.

Frequency range and offset direction

Frequency range

Shift direction

145.200 ~ 145.495 MHz

“DUP

–

” is set

146.610 ~ 146.995 MHz

“DUP

–

” is set

147.000 ~ 147.395 MHz

“DUP+” is set

442.000 ~ 444.995 MHz

“DUP+” is set

447.000 ~ 449.995 MHz

“DUP

–

” is set

Auto repeater function

NOTE for the USA version transceiver:

When turned ON, the Auto Repeater function has

priority over the manual duplex setting. If the transmit

frequency changes after setting, the Auto Repeater

function may have changed the duplex setting.

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands