Icom D-STAR ID-4100A Advanced Manual Download Page 228

Page: 228 / 273

OTHER FUNCTIONS

10-12

The tone squelch opens only when you receive a

signal containing a matching DTCS code in the FM

or FM narrow mode. You can silently wait for calls

from others using the same tone. Also, a reversed

tone squelch function will mute the squelch when you

receive a signal containing a matched DTCS code.

DTCS squelch operation

DTCS code setting and operation

Step 1. Setting the DTCS code

DUP/TONE... >

DTCS Code

1. Push [V/M] several times until you enter the VFO

mode.

2. Push [MODE] several times until you select the

FM or FM-N (FM narrow) mode.

3. Rotate [DIAL] to set an operating frequency.

4. Push [MENU].

5. Rotate [DIAL] to select “DUP/TONE...,” then push

[

6. Select “DTCS Code,” then push [

7. Rotate [DIAL] to set a DTCS code, then push [

Set to between 023 and 754.

8. Push [MENU].

• Returns to the standby screen.

The DTCS code operation

1. Push [QUICK].

2. Select “TONE,” then push [

3. Select the DTCS code type. (Example: DTCS)

4. Holding down [PTT] and call a station.

Operate normally.

To sound beeps when a call is received.

If “DTCS

” is selected, beeps sound for 30

seconds and “

” blinks when a call with the

matching tone signal is received.

Within 30 seconds, push [PTT] to stop the beeps.

(“

” disappears) After that, the transceiver selects

the regular tone squelch operation. If you make no

operation for 30 seconds, the beeps automatically

stop, but “

” continues to blink to indicate that you

received a call.

About the DTCS code type:

•DTCS

: Enables the DTCS squelch with the Pocket

Beep function.

•DTCS:

Enables the DTCS Squelch function.

•DTCS-R: Enables the Reverse DTCS Squelch

function.

•DTCS(T) (“DTCS” blinks):

When you transmit, the selected DTCS code

is superimposed on your normal signal.

When you receive, the function is OFF.

• TONE(T)/DTCS(R)

(“T-DTCS” is displayed, “T” blinks.):

When you transmit, the selected subaudible

tone is superimposed on your normal signal.

When you receive, the DTCS squelch opens

only for a signal that includes a matching

DTCS code and polarity. (Audio is heard)

• DTCS(T)/TSQL(R)

(“D-TSQL” is displayed, “D” blinks.):

When you transmit, the selected DTCS code

is superimposed on your normal signal.

When you receive, the tone squelch opens

only for a signal that includes a matching

tone frequency. (Audio is heard)

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands