![background image](http://html1.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_advanced-manual_611923200.webp)
9
MENU SCREEN
9-57
Squelch/ATT Select
(Default: S-Meter Squelch)
Function >
Squelch/ATT Select
Select the function that varies according to the [SQL]
control position.
• OFF:
Both the S-Meter Squelch and
Attenuator are disabled.
• S-Meter Squelch: The S-Meter Squelch activates
and adjusts the squelch level
when [SQL] is set between 12
o’clock and the fully clockwise
position.
• ATT:
The Attenuator is enabled and
adjusts the attenuator level when
[SQL] is set between 12 o’clock
and the fully clockwise position.
Squelch Delay
(Default: Short)
Function >
Squelch Delay
Set the squelch delay to short or long to prevent
repeated opening and closing of the squelch when
receiving the same signal.
• Short: Shortens the time until the squelch opens.
• Long: Lengthens the time until the squelch opens.
Fan Control
(Default: Auto)
Function >
Fan Control
Select the cooling fan control between Slow, Mid, Fast
and Auto.
• Slow: The fan rotates slow.
• Mid: The fan rotates at mid speed.
• Fast: The fan rotates fast.
• Auto: The fan automatically turns ON during
transmission or when the internal temperature
of the transceiver exceeds the preset value. It
remains ON until the temperature drops below
the value.
Dial Speed-UP
(Default: ON)
Function >
Dial Speed-UP
Turn the dial speed acceleration ON or OFF.
The acceleration automatically speeds up the tuning
dial speed when you rapidly rotate [DIAL].
• OFF: Turns OFF the function.
• ON: Turns ON the function.
Auto Repeater
(Default: ON (DUP))
Function >
Auto Repeater
The Auto repeater function automatically turns the
duplex operation and tone encoder* ON or OFF. The
offset and repeater tone* are not changed by the
auto repeater function. Reset these setting values, if
necessary.
L
This item is displayed only in the USA version
transceiver.
• OFF:
Turns OFF the function.
• ON (DUP):
Turns ON the duplex operation
only. (Default)
• ON (DUP, TONE): Turns ON the duplex operation
and tone encoder*.
* The tone encoder will not be turned ON in the DV mode.
Remote MIC Key
Function >
Remote MIC Key
The function assignments for [F-1] and [F-2] keys on
the supplied HM-207S
hand
microphone
(
remote
-
control
)
can be changed.
See pages 9-58 ~ 9-59 for the assignable key
functions.
• During RX/Standby: The assigned key function is
enabled while receiving or in
standby.
• During TX:
The assigned key function is
enabled during transmission.
Up/Down MIC Key
Function >
Up/Down MIC Key
The function assignments for the [UP] and [DN] keys
on the optional HM-154
hand
microphone
or HM-232
hand
microphone
(
simple
)
can be changed.
See pages 9-58 ~ 9-59 for the assignable key
functions.
• During RX/Standby: The assigned key function is
enabled while receiving or in
standby.
• During TX:
The assigned key function is
enabled during transmission.
Function items
Previous view