Icom D-STAR ID-4100A Advanced Manual Download Page 86

Page: 86 / 273

GPS OPERATION

5-3

You can check your current location.

This section is described using received position data.

Displaying Position Data

1. Push [QUICK].

2. Select “GPS Position,” then push [

•Displays the GPS POSITION screen.

3. Rotate [DIAL] to select the screen.

• My screen (MY), the received screen (RX), the GPS

Memory channel screen (MEM), and the GPS Alarm

channel screen (ALM) are selectable.

•MY: Displays your location in latitude and longitude,

grid locator, altitude, speed*, time, compass

heading* and course direction*.

* Does not displayed when “GPS Select” is set

to “Manual.” (p. 9-24)

(GPS > GPS Set >

GPS Select

)

•RX: Displays the caller station’s location in latitude

and longitude, grid locator, altitude, distance/

direction from your location, SSID, course,

speed, TX power level, height, antenna gain,

antenna direction, temperature, rainfall, wind

direction, wind speed, barometric pressure,

humidity, Time stamp, D-PRS symbol, and call

sign.

Depending on the received signal, some data

may not be displayed. (p. 5-5)

•MEM: Displays the GPS memory channel’s location

in latitude and longitude, grid locator, and

distance/direction from your location.

•ALM: Displays the GPS alarm memory channel

location in latitude and longitude, grid locator,

and distance/direction from your location.

4. Push [



•Returns to the standby screen.

* When a name is not entered in the Memory channel, date

and time are displayed instead of the name.

TIP:

If you transmit with the GPS POSITION screen

open, the screen is temporarily canceled. To check

the position data while transmitting, push [QUICK],

then select “GPS Position” while transmitting.

NOTE:

Latitude, longitude, and altitude data may

differ, depending on your GPS.

[About the GPS Position screen]

<MY>

<RX>

When the caller’s TX format is D-PRS Position (Mobile

station)

<MEM>

<ALM>

Caller’s call sign with SSID

Displays the time the caller

acquired the position data

Direction from

your location

Caller is

south of you.

Displays received

position screen

The course

heading of the

caller is 95

degrees.

Direction from

your location

The location is

East of you.

Displays the GPS

Memory position screen

Direction from

your location

The location is

East of you.

Displays the GPS

alarm position screen

78.0 ml

Course: 95 degrees

Speed: 7.8 mph

Caller station

(D-PRS: mobile)

GPS memory:

Tokyo Skytree

GPS alarm:

Tokyo Big Sight

236 ml

This is an

example for

the GPS data

screens

Your station

Course: 90 degrees

Speed: 21.2 mph

Checking your location

Latitude

Time

Compass direction

top is North.

Your course

heading is

East.

Your course

direction is

90° degrees.

Displays

My location

Altitude

Grid

locator

Speed

Longitude

Distance from

your location

D-PRS symbol

Distance from

your location

Distance from

your location

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands