background image

01 

RF-Link/Araneus USA, Inc. 

44845  Industrial  Drive 

Fremont, CA 94538 U.S.A. 

Tel: 510-413-5885 

Fax: 510-651-5995 

www.rflinkusa.com 

 
 

 

QUICK INSTALL GUIDE 

Model: ACS-5820 

5.8 GHz Cable Sender 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Package Content……………………………………….……… 01 

2. Panel Control and Function……...…………………….……… 02 

3. Specification…………………............…………………………04 

4. Setup Guide……………………..……………….……………..05 

5. Orient Transmitter/Receiver for optimal performance…….…...06 

 

 

 

Check to make sure that all units shown as below are enclosed. If something 

missed, please contact your dealer. 

 

1.  5.8GHz Transmitter * 1                2.  5.8GHz Receiver * 1 

 

 

 

 

 

UHF: 433.392MHz (European) 

UHF: 418MHz (USA Standard) 

3.    IR Mouse * 1 / fasten strips * 2      

 

4.    IR Remote Controller * 1 

 

 

 

 

 

 

 

 

 

 

 

 

 

Contents 

1. Package Content 

Summary of Contents for ACS-5820

Page 1: ... Panel Control and Function 02 3 Specification 04 4 Setup Guide 05 5 Orient Transmitter Receiver for optimal performance 06 Check to make sure that all units shown as below are enclosed If something missed please contact your dealer 1 5 8GHz Transmitter 1 2 5 8GHz Receiver 1 UHF 433 392MHz European UHF 418MHz USA Standard 3 IR Mouse 1 fasten strips 2 4 IR Remote Controller 1 Contents 1 Package Con...

Page 2: ...ys from remote controller 5A Directional 5 8GHz A V antenna sends A V signal from source equipment 5B Directional 5 8GHz A V antenna receives audio and video signal 6 Power on off switch 7 DC power input connect to power supply 9V 8 IR Mouse output to remotely control source AV equipment 9A CABLE IN 75Ω CATV Cable in 9B No available To TV 10A Video Jack yellow input from source AV equipment 10B Vi...

Page 3: ...nnect the receiver to a TV monitor or speaker in another location Transmitter Receiver RETURN NOTE Make sure the ON OFF switch is in the OFF position before connection 4 Setup Guide 1 Connect one end of the RCA cable to the audio and video jacks and connect the other end to a source device via its AV output 2 Connect the CATV cable to the Cable IN jack 3 Connect the DC plug of the adapter to the D...

Page 4: ... extender the remote control antennas should also be oriented at a right angle to an imaginary line drawn between the transmitter and receiver If your remote control extender is not working satisfactorily rotate the remote control antenna on either the transmitter or receiver 90 degrees so that it is still perpendicular to the path between the units See Fig 4 If you notice improved performance kee...

Reviews: