Icom D-STAR ID-4100A Advanced Manual Download Page 11

Page: 11 / 273

MEMORY OPERATION

1-4

In the Memory mode, you can select the Memory

channels by rotating [DIAL].

1. Push [V/M] several times until you enter the

Memory mode.

Pushing [V/M] toggles between the VFO and Memory

modes.

2. Rotate [DIAL].

•Selects a Memory channel.

Blank channels are not selectable.

Selecting a Memory channel

[DIAL]

[V/M]

Two Call channels (C0/C1) are selectable in each of

the 144 and 430 MHz bands.

Factory default frequencies and operating modes are

entered into the Call channels. Change these to suit

your operating needs.

1. Hold down [CALL] for 1 second.

•Enters the Call channel mode.

Pushing [CALL] again cancels the Call channel

mode.

2. Rotate [DIAL].

•Selects a Call channel.

Selecting a Call channel

[DIAL]

[CALL]

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Brands by name

Popular brands