IBM P 615 series, Service Manual

Page: 210 / 491

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
2B20 8880 Unrecoverable internal hardware error If Linux is the only operating system on the
failing system, call service support.
If AIX is available, and the system is powered
down, replace the FRU indicated by the service
processor error log entry. If AIX is available and
the system has been rebooted, run online AIX
diagnostics and look for an AIX error log entry in
which the description says cache or cache
controller error. Replace the FRUs listed with
this entry.
2B20 8881 Software error Call service support.
2B20 8882 Software error Call service support.
2B20 8883 Software error Call service support.
2B20 8884 Unrecoverable processor subsystem error If Linux is the only operating system on the
failing system, call service support.
If AIX is available, and the system is powered
down, replace the FRU indicated by the service
processor error log entry. If AIX is available and
the system has been rebooted, run online AIX
diagnostics and look for an AIX error log entry in
which the description says cache or cache
controller error. Replace the FRUs listed with
this entry.
2B20 8885 Unrecoverable internal hardware error If Linux is the only operating system on the
failing system, call service support.
If AIX is available, run online AIX diagnostics
and look for an AIX error log entry in which the
description says I/O bus time-out, access, or
other error, or I/O bridge/device internal error.
Replace the FRUs listed with this entry.
2B20 8888 Operating system termination request received Informational message.
2B2x 00EE Description: An exception error has been reported on a global processor
Action: The type of interrupt that caused the exception is specified by the x as follows:
0: Unknown interrupt
1: System reset interrupt (SRI)
2. Machine check interrupt (MCI)
3. Data storage interrupt (DSI)
4. Instruction storage interrupt (ISI)
5. External interrupt (EXI)
6. Alignment interrupt (ALI)
7. Program interrupt (SRI)
8. Floating unavailable interrupt (FUI)
1. Check for system firmware updates. Apply if available.
2. Call service support.
190
Eserver
pSeries 615 Service Guide