IBM P 615 series, Service Manual

Page: 187 / 491

SPCN Error Codes
Attention: If a power supply or fan is hot-swapped, wait five minutes, then recheck the operating system
error log. If the system has to be shut down to replace a power supply or fan, reboot the system, wait five
minutes after the operating system login prompt appears, then recheck the operating system error log. If
the detailed information for the most recent error with the same identifier indicates that the original problem
has not been fixed by performing the first action in the action column, continue with the next action in the
action column.
Attention: If you replace FRUs or perform an action and the problem is still not corrected, go to “MAP
1540: Problem Isolation Procedures” on page 110 unless otherwise indicated in the tables.
If you replace FRUs and the problem is corrected, go to
″
MAP 0410: Repair Checkout
″
in the RS/6000
Eserver
pSeries Diagnostic Information for Multiple Bus Systems .
Table 4. SPCN Error Codes for the CEC (system unit)
Error Code Description Action/
Possible Failing FRU
1011 00AC AC loss Informational message
1011 00EF Emergency power off Informational message
1011 1510 Power supply 1 AC fault
1. Check input power to the power supply.
2. System drawer power supply 1
Location: U0.1-V1
1011 1511 Power supply 1 power fault System drawer power supply 1
Location: U0.1-V1
1011 1512 Power supply 1 non-power fault System drawer power supply 1
Location: U0.1-V1
1011 1513 Domain fault allocated to power supply 1 System drawer power supply 1
Location: U0.1-V1
1011 1514 Power supply 1 fan fault System drawer power supply 1
Location: U0.1-V1
1011 1520 Power supply 2 AC fault
1. Check input power to the power supply.
2. System drawer power supply 2
Location: U0.1-V2
1011 1521 Power supply 2 power fault System drawer power supply 2
Location: U0.1-V2
1011 1522 Power supply 2 non-power fault System drawer power supply 2
Location: U0.1-V2
1011 1523 Domain fault allocated to power supply 2 System drawer power supply 2
Location: U0.1-V2
1011 1524 Power supply 2 fan fault System drawer power supply 2
Location: U0.1-V2
1011 1B0A +12/-12V load fault Go to “MAP 1520: Power” on page 98.
1011 1B0B 1.8V load fault Go to “MAP 1520: Power” on page 98.
1011 1B0C 3.3/1.5V load fault Go to “MAP 1520: Power” on page 98.
1011 1B0D 2.5V load fault Go to “MAP 1520: Power” on page 98.
1011 1B0E +5V load fault Go to “MAP 1520: Power” on page 98.
1011 1B0F 1.5/1.2V load fault Go to “MAP 1520: Power” on page 98.
1011 1F01 TMS limit reached - Log Only Informational message
Chapter 5. Error Code to FRU Index
167