IBM P 615 series, Service Manual

Page: 427 / 491

Read the Rack Safety Instructions
Review the following instructions for mounting the system drawer into the rack.
Rack Safety Instructions
v Do not install this unit in a rack where the ambient temperatures will exceed 35 degrees C.
v
Do not install this unit in a rack where the airflow is compromised. Any side, front or back of the unit
used for air flow through the unit must not be in indirect contact with the rack.
v Ensure that a hazardous condition is not created due to uneven mechanical loading when installing this
unit in a rack. If the rack has a stabilizer it must be firmly attached before installing or removed this unit.
v Consider the connection of the equipment to the supply circuit so that the overloaded circuits do not
compromise the supply wiring or over-current protection.
v An electrical outlet that is not correctly wired could place hazardous voltage on the metal parts of the
system or the devices that attach to the system. It is the responsibility of the customer to ensure that
the outlet is correctly wired and grounded to prevent an electrical shock.
When installing the Model 6C3, you will need the following items:
v Rack-Mounting Template
v
2 Slide Rail Assemblies
v Cable Management Arm
v
Rack-Mounting Kit Envelope
v Screwdriver or similar tool if available
Appendix D. Setting Up the System
407