IBM 5400-006, Setup And Operator Manual

Page: 64 / 210

Unloading and Setting the Printing Form
5
Make sure that the jam sensor on the left tractor is clean. If it is dirty, clean it
with a soft cloth. (See 3.3, “Form Jam Recovery” on page 3-5.)
6
Open the front door load a new form from the form stand. Insert the form
into the form insertion slot and push it up to the height of the left and right
tractors.
Notes
Ÿ
Take the form out of the box before placing it in the form stand.
Leaving it in the box might cause a paper jam.
Ÿ
Set the form so that the left edge of the form is located to the left of
the EOF (End of Form) switch label.
2-24
IBM 5400-006 Printer: Setup Instruction and Operator's Guide