Label Forms
A.5 Label Forms
When using the label forms (tack paper), pay attention to the following:
Materials, ream, and thickness
Notes:
1. The ream of the label forms (label + ad board) must be 135 kg or
less.
2. The thickness of the label forms (label + ad board) must be 0.2
mm or less.
Type of label forms:
There are two types of label forms: half-cut type and modeled type. Ordinarily,
use the half-cut type.
For the modeled type, the label is peeled in the machine and form jam results
frequently.
Do not use the modeled type.
Pretest
Test enough in advance and check that the following problems do not occur:
– The label is not peeled. (This causes form jam.)
– Glue does not stick out extremely. (This might cause machine trouble.)
– No folding error is detected in the machine.
Storage Place
Since label forms reduce and transform as the temperature and humidity
change, labels peel. Labels must be stored in a dark and cool place (temper-
ature 20°C, relative humidity 40 to 60%) where the temperature and humidity
are stable.
Label forms must be kept a vinyl package after use.
Label
Ream
45
∼
55 kg (Note 1)
Materials High Quality Form
Thickness 0.08 mm or less (Note 2)
Adhesive
Adhesiveness
350 g/25 mm or more
Ball Tack
No.3 or more
Fit to the label material. Do not blot or let stick out.
Board
Ream
55
∼
80 kg (Note 1)
Material Glassine Paper
Thickness 0.10 mm or more (Note 2)
A-6
IBM 5400-006 Printer:
Setup Instruction and Operator's Guide
Summary of Contents for 5400-006
