IBM 5400-006, Setup And Operator Manual

Page: 57 / 210

Copy e Draft mode
Ÿ
Used to print 6 to 8 multipart forms in the draft mode.
Ÿ
Character font is 24 x 24 dots, but characters are deeper and bolder
than draft mode.
Ÿ
The character size is the same as the 24 x 24 dots of the NLQ mode.
Ÿ
Printing speed is 600 LPM.
Note: If Level 2 or Level 3 are set in the copy enhance mode, printing
speed is 300 LPM. If Level 4 (Uneven Form) is set, printing speed is
495 LPM. If Level 5 (Uneven Form: Strong) is set, printing speed is
248 LPM.
Ÿ
The Copy Enhance lamp and the Draft lamps light up when this mode
is selected.
Note: For more than six multipart sheets, only back carbon papers can be used.
Print Mode Speeds by Print Mode (Max.)
Note: This shows the maximum values. Depending on the printing pattern and
host system, values might vary.
Modes marked with an asterisk are more easily influenced by the printing
pattern.
Print mode NLQ print
mode
High quality DP Draft
360 LPM 180 LPM 500 LPM 600 LPM
Copy
enhance
mode
Copy
enhance
only
Copy
enhance
+ High
quality
Copy
enhance
+ DP
Copy
enhance
+ draft
Level 1* 360 LPM 180 LPM 500 LPM 600 LPM
Level 2 180 LPM 90 LPM 250 LPM 300 LPM
Level 3* 180 LPM 90 LPM 250 LPM 300 LPM
Level 4* 310 LPM 155 LPM 420 LPM 495 LPM
Level 5* 155 LPM 76 LPM 210 LPM 248 LPM
Chapter 2. Operation
2-17