IBM 5400-006, Setup And Operator Manual

Page: 107 / 210

Initializing the Printer
3
Press Step Feed Up or Step Feed Down to display the initial set value.
Each time you press Step Feed Up or Step Feed Down, the initial value on
the lower row of the LCD changes. To set the DP mode, press Step Feed
Up or Step Feed Down. until “DP MODE” is displayed on the LCD.
Note: For details about the initial values displayed on the LCD, see 2.12.3,
“Initial Set Items” on page 2-68.
4
Match the initial set item with the initial value and press Entry. The initial
value is written to the IBM 5400-006 printer memory and the Start lamp lights
up.
5
To write the changes into the printer memory, press Cancel. The following
message is displayed in the LCD.
After the initialization is complete, the IBM 5400-006 printer returns to the
status set just after the power was turned on. (See 2.3.1, “Powering On” on
page 2-9.)
Chapter 2. Operation
2-67