IBM 4332-004 - InfoPrint 40 B/W Laser Printer, User Manual

Page: 76 / 296

Note:
The printer driver or print application you use may allow you to
specify values such as paper size, input tray, output bin, and manual
feeding. Values set in print jobs (either by the print application or by
the printer driver) override values you set at the printer.
Selecting the Default Input Tray
Situation
: You want to change the default input tray for your printer.
Action :
1. Press the Online key until you see OFFLINE in the display.
2.
Press the Menu key until you see PAPER MENU in the display.
3.
Press the Item key until you see SOURCE=source* in the display, where
source is the current default.
4.
Press the Value key until you see the input tray you want to use as the
default.
5. Press the Enter key to select the new tray. An asterisk appears next to the
value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Note: Values specified in your print jobs override defaults set at the printer.
For example, if a print job requests Tray 1, the printer will use Tray 1,
even if the default tray is set to something else.
Selecting the Default Output Bin
Situation : You have installed the 2000-Sheet Finisher and you want to make it
the default output bin.
Action :
1.
Press the Online key until you see OFFLINE in the display.
2.
Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see OUTPUT=output* in the display, where
output is the current default.
4.
Press the Value key until you see the value you want. If you have the
2000-Sheet Finisher installed, you can select one of the following values:
v
MAIN is the face-down output bin.
v
FACE-UP is the Face-Up Output Bin.
v
FINISHR1 is the upper bin of the 2000-Sheet Finisher.
v
FINISHR2 is the middle bin of the 2000-Sheet Finisher.
v
FINISHR3 is the lower bin of the 2000-Sheet Finisher.
v
ANY-FIN specifies automatic bin switching.
64
Infoprint 32 and Infoprint 40: User’s Guide